DS-6700HFHI/V Series Network HD Encoder User Manual
49
Trigger an audible beep when an alarm is detected.
Notify Surveillance Center
Send an exception or alarm signal to remote alarm host when an event occurs. The alarm host refers to
the PC installed with Remote Client.
Send Email
Send an email with alarm information to a user or users when an event occurs.
To send the Email when an event occurs, you need to go to the network setting interface to set the
related parameters. Refer to
Section6.3.6 Configuring Email Settings.
Upload to FTP
Capture the image when an alarm is triggered and upload the picture to a FTP server.
Figure 7. 10
Motion Detection-Linking Method
(3)
Select the channel you want to trigger an external alarm output when a motion detection event occurs.
To trigger an external alarm output when an event occurs, you need to go to the Alarm Output Settings
interface to set the related parameters.
1)
Click
Configuration> Event > Basic Event > Alarm Output
to enter the Alarm Output
Settings interface.