DS-6700HFHI/V Series Network HD Encoder User Manual
40
Chapter 7
Camera Settings
7.1
Configuring Display Parameters
Purpose:
You can configure the video parameters of the camera, including the brightness, contrast, saturation and hue, etc.
Steps:
1.
Click the
Configuration > Image> Display Settings
to enter the Display Settings interface:
2.
Select the camera to configure the video parameters.
3.
Select the mode according to different light conditions. Four modes are selectable:
Standard
: in general lighting conditions (default).
Indoor:
the image is relatively smoother.
Outdoor:
the image is relatively clearer and sharper. The degree of contrast and saturation is high.
Dim Light:
the image is smoother than the other three modes.
Figure 7. 1
Video Parameters Settings
4.
Move the slider to set the brightness, contrast, saturation and hue to 0~255. The default value is 128 for the
brightness, contrast and hue is 128 and 136 for the saturation.
5.
Move the slider to set the sharpness to 0~15 and the denoising level to 0~3. The default value is 3 for the
sharpness and 1 for the denoising level.
You can click the
Default
button to restore the default settings.
7.2
Configuring OSD Settings
Purpose: