Camera Link Line Scan Camera
·
User Manual
71
You cannot use Gamma correction function and LUT function at the same time.
After using the TDI function, you need to set LUT again.
Refer to section File Access Control for exporting and importing LUT device feature.
Steps:
1.
Click LUT Control, and enable LUT Enable.
2.
Enter LUT Index according to actual demands, and its range is from 0 to 1023.
3.
Enter LUT Value according to actual demands, and its range is from 0 to 4095.
4.
Click Execute in LUT Save to save it.
The parameter of LUT Save may differ by camera models. If the camera has no LUT Save, the
settings you configured will be saved in the camera in real time.
Figure 10-28
Set LUT
10.19 Set Flat Field Correction
The fat field correction function and specific setting method may differ by camera models.
The fat field correction (FFC) includes PRNUC correction and FPNC correction, and they are used to
improve the image uniformity that may be impacted by the sensor, light sources, external
conditions, etc.
FPNC Correction
Steps:
1.
Click Shading Correction, and select FPNC Correction as Shading Selector.
