High End Systems High End LCD Controller for Studio Color, User Manual

Page: 191 / 272

Studio Color LCD Controller Macintosh 7-29
7
2. Your computer screen should display the following message:
Restore to controller from PC.
Send data to controller now.
Press SELECT to quit anytime.
3. Press Y to send a text file. Use the Please Select
A File dialog box to locate the file containing backed-up
memory, then click Select to start the upload.
4. While the upload is underway, the controller’s LCD display
appears as shown below:
Note You can press the
<Select>
key on the controller’s
front panel at any time to stop the transfer.
5. The controller’s LCD display shows the following when the
transfer is complete:
6. Press the controller’s
<Select>
key to complete the operation.
Verifying the Transfer
Make sure the transfer was successful by checking the
programming on several pages in different memories you
know should have been changed. If the pages are
programmed as you expected, you are finished.
)(;$2$
*#'-#''
)(;$2$
*#8-#
**