High End Systems High End LCD Controller for Studio Color, User Manual

Page: 43 / 272

Studio Color LCD Controller Connecting Fixtures 2-9
2
Connecting Fixtures
The Studio Color LCD controller uses its native DMX 512
protocol (language) to control Studio Color fixtures.
Configuring the Fixtures
Before using the controller with Studio Color fixtures, you
must do both of the following:
• Verify each fixture is using firmware version 38c or later.
• Select a fixture number for each fixture.
Verifying the Firmware Version
You can verify the firmware version using the fixture’s Info
menu as described below:
1. Press and hold down the
<Menu>
button on the fixture until
the menu appears as shown below:
Figure 2-2. The fixture’s Addr(ess) menu is at the top
level in the Studio Color menu system.