High End Systems High End LCD Controller for Studio Color, User Manual

Page: 122 / 272

5-8 Selecting MSC or LSC Studio Color LCD Controller
Selecting MSC or LSC
MIDI Show Control (MSC) and Lightwave Show Control
(LSC) are two different protocols (languages) that achieve
the same effect: coordinating and controlling playback of
master controllers. (MSC and LSC have no effect on slaved
controllers, since playback of slaved controllers is
determined by masters.)
These protocols allow you to set up cue lists to determine the
order in which your programmed presets or pages are played
back. Both show control protocols are supported by the full
line of Lightwave Research LCD controllers, including this
one. The difference between them is what “show control”
program you must use, as explained below:
• MSC is an industry-standard show control protocol that
is supported by a wide variety of controllers, including
the Lightwave Research series of LCD controllers and
the Status Cue
®
system.
• LSC is supported by Lightwave Control Center (LCC)
software only and works with Lightwave Research LCD
controllers. You can order LCC free of charge from your
High End Systems dealer/distributor (part number
80440004 for the PC version or 80440003 for the
Macintosh
®
version).
Selecting the Protocol
1. Press the
<Menu>
key to enter the menu system.
2. Select
;
from the Main menu, as shown below:
) ;:-(
- D((