High End Systems High End LCD Controller for Studio Color, User Manual

Page: 44 / 272

2-10 Connecting Fixtures Studio Color LCD Controller
2. Use the
<Up>
and
<Down>
arrow buttons located to the right
of the display to select Info, as shown below:
Figure 2-3. The fixture’s Info menu displays information
about the fixture, including the’s current firmware version.
3. Press the
<Enter>
button to view the Info menu items, then
use the
<Up>
and
<Down>
arrow buttons to select VER, as
shown below:
Figure 2-4. The controller’s Ver(sion) menu displays the
current firmware version.
4. Press the
<Enter>
button to view the firmware version. If the
firmware version is 38C or above, no further action is
required. Continue with the section titled “Setting A Fixture
Number” on page 2-11.
5. If the firmware version is below (or less than) 38C, you must
upgrade the firmware in one of the ways shown below:
• If the firmware version is below (less than) 35, you must
use the Status Cue console to upgrade it.
• If the firmware version is above (greater than) 36, you
can use the Studio Color Upload Module (part number
26040002) available from your High End Systems Inc.
dealer/distributor. You can also use the Status Cue
console.