Configuring an HPE Smart Array Gen10 controller
Procedure
2. If you are running the server in UEFI Boot Mode, select the boot options.
3. Update the drive firmware if it is not the latest revision.
4. (Optional) If running the server in Legacy Boot Mode, set the controller as the boot controller.
5. (Optional) If running the server in Legacy Boot Mode, change the controller boot order.
6. If the new controller is not the new boot device, install the device drivers.
7. Update the controller firmware if it is not the latest revision.
• For MR controllers, use Service Pack for ProLiant (SPP), MR Storage Administrator, or StorCLI.
• For SR controllers, use SPP.
8. Create arrays and logical drives.
• For MR controllers, use UEFI System Utilities, MR Storage Administrator, or StorCLI.
• For SR controllers, use UEFI System Utilities or HPE Smart Storage Administrator (HPE SSA).
See the following resources for more information:
• SPP – See the product documentation in the information library:
https://www.hpe.com/info/spp/docs
• MR Storage Administrator – See the HPE MR Storage Administrator User Guide in the information library:
https://www.hpe.com/info/smartstorage-docs
132
Hardware options installation
Summary of Contents for ProLiant ML350 Gen10
Page 28: ...NVMe drive bay numbering Tower orientation Rack orientation 28 Component identification ...
Page 31: ...Component identification 31 ...
Page 33: ...Open the front bezel Procedure 1 Unlock the front bezel 2 Open the front bezel Operations 33 ...
Page 178: ...Cable color Description Blue Front I O cable Orange Front USB cable 178 Cabling ...