4.
Disconnect all peripheral cables from the server.
5.
Do one of the following:
Position the tower server for hardware configuration.
• Server in rack mode:
Extend the server from the rack.
6.
7.
8.
Optional: If installed,
This step is only required if the expansion board cabling needs to be routed through the front cable channel.
9.
Remove the PCI blank retainer.
10. Identify the expansion slot compatible with the option.
11. Remove the PCI slot blank.
If you are installing a double-width expansion board, remove two PCI slot blanks.
13. Make sure that any switches or jumpers on the expansion board are set properly.
For more information, see the documentation that ships with the option.
14. Install the expansion board.
• Single-width standup expansion board
• Double-width standup expansion board
Hardware options installation
139
Summary of Contents for ProLiant ML350 Gen10
Page 28: ...NVMe drive bay numbering Tower orientation Rack orientation 28 Component identification ...
Page 31: ...Component identification 31 ...
Page 33: ...Open the front bezel Procedure 1 Unlock the front bezel 2 Open the front bezel Operations 33 ...
Page 178: ...Cable color Description Blue Front I O cable Orange Front USB cable 178 Cabling ...