manualshive.com logo in svg

Hewlett Packard Enterprise ProLiant ML350 Gen10, User Manual

The Hewlett Packard Enterprise ProLiant ML350 Gen10 User Manual is a comprehensive guide to efficiently operate and maintain this high-performance server. With easy-to-understand instructions and troubleshooting tips, this manual is essential for maximizing productivity. Download your free copy from manualshive.com to get the most out of your ProLiant ML350 Gen10.

Share
Download
background image

Procedure

1. Access the System ROM Flash Binary component for your server from the Hewlett Packard Enterprise Support Center.

2. Copy the binary file to a USB media or iLO virtual media.

3. Attach the media to the server.

4. Launch the System Utilities, and select Embedded Applications > Firmware Update.

5. Select a device.

The 

Firmware Updates screen lists details about your selected device, including the current firmware version in use.

6. Select Select Firmware File.

7. Select the flash file in the File Explorer list.

The firmware file is loaded and the 

Firmware Updates screen lists details of the file in the Selected firmware file

field.

8. Select Image Description, and then select a firmware image.

A device can have multiple firmware images.

9. Select Start firmware update.

Updating the firmware from the UEFI Embedded Shell

Procedure

1. Access the System ROM Flash Binary component for your server from the Hewlett Packard Enterprise Support Center

(

https://www.hpe.com/support/hpesc).

2. Copy the binary file to a USB media or iLO virtual media.

3. Attach the media to the server.

4. Boot to the UEFI Embedded Shell.

5. To obtain the assigned file system volume for the USB key, enter 

map –r

.

6. Change to the file system that contains the System ROM Flash Binary component for your server. Enter one of the

fsx

 file systems available, such as 

fs0:

 or 

fs1:

, and press 

Enter.

7. Use the 

cd

 command to change from the current directory to the directory that contains the binary file.

8. Flash the system ROM by entering 

fwupdate –d BIOS -f 

filename

.

9. Reboot the server. A reboot is required after the firmware update in order for the updates to take effect and for

hardware stability to be maintained.

Online Flash components

This component provides updated system firmware that can be installed directly on supported operating systems.
Additionally, when used in conjunction with SUM, this Smart Component allows the user to update firmware on remote
servers from a central location. This remote deployment capability eliminates the need for the user to be physically
present at the server to perform a firmware update.

Software and configuration utilities

191

Summary of Contents for ProLiant ML350 Gen10























































































































































































































Reviews:

No comments

Related manuals for ProLiant ML350 Gen10

Xerox EX Printing Manual preview
EX
Brand: Xerox Pages: 40
U.S. Converters XS1000 User Manual preview
XS1000
Brand: U.S. Converters Pages: 5
Yamaha MCX-2000 - MusicCAST Digital Audio Server Owner'S Manual Addendum preview
MCX-2000 - MusicCAST Digital Audio Server
Brand: Yamaha Pages: 25
GDC SX-2000A Series User Manual preview
SX-2000A Series
Brand: GDC Pages: 185
Supero 6027R-E1R12N User Manual preview
6027R-E1R12N
Brand: Supero Pages: 112
GarrettCom Magnum 10ETS Hardware Installation And User'S Manual preview
Magnum 10ETS
Brand: GarrettCom Pages: 55
Supero SUPERSERVER 6027TR-H71FRF User Manual preview
SUPERSERVER 6027TR-H71FRF
Brand: Supero Pages: 118
Kyocera Printserver Installation Manual preview
Printserver
Brand: Kyocera Pages: 207
Icy Box IB-NAS6220 Specifications preview
IB-NAS6220
Brand: Icy Box Pages: 3
LOYTEC LINX-21 Series Installation Instructions preview
LINX-21 Series
Brand: LOYTEC Pages: 4
Rasilient AI72 User Manual preview
AI72
Brand: Rasilient Pages: 30
NAIM NS01 Reference Manual preview
NS01
Brand: NAIM Pages: 20
Tandberg Data BizNAS D400 Series Quick Start preview
BizNAS D400 Series
Brand: Tandberg Data Pages: 2
EVS XS Hardware Technical Reference Manual preview
XS
Brand: EVS Pages: 118
Obvius AcquiLite A7810 Installation And Operation Manual preview
AcquiLite A7810
Brand: Obvius Pages: 29
TRENDnet TEW-MP2U - Wireless Multi-Function Print Server Specifications preview
TEW-MP2U - Wireless Multi-Function Print Server
Brand: TRENDnet Pages: 2
Chip PC Xtreme PC NG6450 Specifications preview
Xtreme PC NG6450
Brand: Chip PC Pages: 4
Comtrol DeviceMaster LT User Manual preview
DeviceMaster LT
Brand: Comtrol Pages: 136

Brands by name

Popular brands

Load more brands