HELLA Aglaia Advanced People Sensor Installation And Configuration Manual Download Page 36

Page: 36 / 179

36 / 179

The reproduction, distribution and utilization of this document as well as the communication of its contents to others without

express authorization is prohibited. Offenders will be held liable for the payment of damages.

21.04.2020

Version 1.18.0

Structure and function

APS-90, APS-180 and APS-90-Outdoor-PoE

3.2.9

Wireless services

Optional function
This function can only be enabled if a corresponding license file is

installed on the device.

The device can be used in combination with a wireless USB adapter. There are two options

for now. One for WiFi only and one for WiFi and Bluetooth. These are preselected by

HELLA Aglaia to use the correct driver software inside the firmware.
Using these wireless USB adapters, 3 modes for WiFi are available:
WiFi tracking

tracking of wireless devices (such as mobile phones)

WiFi HMI Access

access the user interface by WiFi

WiFi Data Interface

transmitting counting data and others wireless

Beside this with the WiFi and Bluetooth adapter detailed Bluetooth tracking is available in

parallel (such as BLE tokens).

The APS-90-Outdoor-POE has no USB connector, so there is no wireless

USB adapter and no wireless services useable with this device.

3.2.10 Digital I/O

The device can use digital inputs for counting and digital outputs to signal count events or

zone alerts.
Digital inputs and outputs are available on the following devices:

Device

Inputs

Outputs

APS-90E-IO

APS-180E-IO

APS-90-Outdoor-PoE

APS-90-IO-8GB

APS-180-IO-8GB

Summary of Contents for Advanced People Sensor




















































































































































































Search results

Summary of Contents for Advanced People Sensor

Reviews:

Related manuals for Advanced People Sensor

Brands by name

Popular brands

HELLA Aglaia Advanced People Sensor, Installation And Configuration Manual

Search results

Summary of Contents for Advanced People Sensor

Reviews:

Related manuals for Advanced People Sensor

Brands by name

Popular brands