HELLA Aglaia Advanced People Sensor, Installation And Configuration Manual

Page: 116 / 179

116 / 179 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without
express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design. 21.04.2020
Version 1.18.0
Configuration
APS-90, APS-180 and APS-90-Outdoor-PoE
■ To add the sensor to an IBM Watson IoT Platform account enter the Watson Organiza-
tion ID (Fig. 114 /1).
■ To add the sensor to a group of sensors at the IBM Watson IoT Platform account enter
the Watson API Key (Fig. 114 /2) and Watson API Token (Fig. 114 /3).
■ To send accumulated counting data in these time frames set the Counting Data
Interval (Fig. 114 /4).
■ To go back to the last saved settings click the Reset button (Fig. 114 /5).
■ To save all the settings in the device click the Save button (Fig. 114 /6).
6.9.1.3 REST Push
To enable push service via REST activate REST Push (Fig. 115 /8).
Fig. 115: Push Service - REST Push
■ Set the User Name (Fig. 115 /1).
■ Set the REST Password (Fig. 115 /2).
■ Set the address for the Server (Fig. 115 /3) and the Server Port (Fig. 115 /4).
■ To send accumulated counting data in these time frames set the Counting Data
Interval (Fig. 115 /5).
■ To go back to the last saved settings click the Reset button (Fig. 115 /6).
■ To save all the settings in the device click the Save button (Fig. 115 /7).