HELLA Aglaia Advanced People Sensor, Installation And Configuration Manual

Page: 131 / 179

131 / 179 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without
express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design. 21.04.2020
Version 1.18.0
Configuration
APS-90, APS-180 and APS-90-Outdoor-PoE
6.11.6 Bluetooth Mode
The APS can use the Bluetooth USB adapter to track Bluetooth devices.
Fig. 134: Bluetooth Mode
■ To track Bluetooth devices such as mobile phones choose the Bluetooth Mode Blue-
tooth Tracking (Fig. 134 /10).
■ To deactivate the Bluetooth USB adapter choose the Bluetooth Mode Off
(Fig. 134 /11).
■ Set a Sample Interval (Fig. 134 /3). The value must be between 1 sec and 60 sec.
The Sample Interval determines the time period after a scan is completed and trans-
mitted. The scan rate is set internally.
■ During a sample interval, a Bluetooth device can be detected more often. To get only
one entry for each Bluetooth device, activate Exclude duplicates (Fig. 134 /8).
■ To track only stored MAC addresses activate Use MAC Filter (Fig. 134 /7).
■ By activating Use MAC Filter the editing of MAC addresses becomes visible. To add a
MAC address set the address in the field (Fig. 134 /1) and click the accept button
(Fig. 134 /2).
■ To remove a MAC address from the list (Fig. 134 /4) click the delete button
(Fig. 134 /3).
■ To go back to the last saved settings click the Reset button (Fig. 134 /5).
■ To save all the settings in the device click the Save button (Fig. 134 /6).