HELLA Aglaia Advanced People Sensor Installation And Configuration Manual Download Page 84

Page: 84 / 179

84 / 179

The reproduction, distribution and utilization of this document as well as the communication of its contents to others without

express authorization is prohibited. Offenders will be held liable for the payment of damages.

21.04.2020

Version 1.18.0

Configuration

APS-90, APS-180 and APS-90-Outdoor-PoE

Configuration

6.1

Preparation

The equipment needed for configuration corresponds to the installation.

■

Ethernet switch with PoE or only a PoE injector

■

Ethernet cables (min. spec cat 5) with standard RJ45 connectors or M12 connector

■

Router with DHCP in the network or otherwise a PC or tablet running a DHCP server

(e.g. OpenDHCP).

■

PC or tablet with latest web browser supporting HTML5 and WebSockets.

The device has a web based user interface for configuration.
Upon delivery the device is set up to use DHCP to find a free IP address in the attached

network.
Initially, a request for an IP address is sent from the device to the DHCP server. Startup is

blocked until the device gets an answer from the DHCP server with a usable IP address.

Connect the device with Ethernet cable via the PoE switch or injector to the PC or

tablet.
Switch on the power supply for the device.



The device will indicate the startup process with the LED. LED red on starting up

for approx. 10 sec, LED is blinking in green during the complete startup process,

LED is blinking in yellow while waiting for DHCP, at the end of startup LED green

for approx. 6 sec and then normally off.

6.1.1

Determine the IP address in the DHCP server

Access your router or DHCP Software to find the IP address used by the device.
Search for the unique MAC address of the device.



The MAC address starts with 00:0b:91 for HELLA Aglaia devices.

Fig. 68: Fetching the used IP address (example)

1.
2.

Summary of Contents for Advanced People Sensor




















































































































































































Search results

Summary of Contents for Advanced People Sensor

Reviews:

Related manuals for Advanced People Sensor

Brands by name

Popular brands

HELLA Aglaia Advanced People Sensor, Installation And Configuration Manual

Search results

Summary of Contents for Advanced People Sensor

Reviews:

Related manuals for Advanced People Sensor

Brands by name

Popular brands