HELLA Aglaia Advanced People Sensor, Installation And Configuration Manual

Page: 103 / 179

103 / 179 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without
express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design. 21.04.2020
Version 1.18.0
Configuration
APS-90, APS-180 and APS-90-Outdoor-PoE
Fig. 94: Connected slave device
■ When the connection between a slave and master is established the status (Fig. 94 /5)
changes to unconfigured .
■ The hostname (Fig. 94 /4) and the IP address (Fig. 94 /3) of a connected slave are
shown.
■ To delete a slave click the delete button (Fig. 94 /2).
■ To edit a slave click the edit button (Fig. 94 /1).
6.5.2 Configure the slave devices
When configuring the device as a slave determine the master device.
Fig. 95: Master Device
■ To find a master device automatically scan for master devices by clicking the Scan for
Master Device button (Fig. 95 /1).
■ A popup-window opens and shows the master devices and other devices found in the
network.