130 / 179
The reproduction, distribution and utilization of this document as well as the communication of its contents to others without
express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design.
21.04.2020
Version 1.18.0
Configuration
APS-90, APS-180 and APS-90-Outdoor-PoE
To connect to the device in Access Point mode, choose the device SSID in the WiFi list e.g.
of your notebook and connect with your password (default is
<People_Sensor>
). To open
the user interface use the AP IP address (Fig. 132 /10).
6.11.5 WiFi Data Interface
To send counting and other data wirelessly the device must login to a wireless network.
Fig. 133: WiFi Data Interface
■
To send counting and other data wireless choose the WiFi Mode
WirFi Data Interface
■
To choose legal frequency spectrum select your region code ("US" = USA or "DE"=Ger-
many) at the
Regulatory Domain
drop down list (Fig. 133 /1). Default region code
00
is
used for worldwide roaming - and uses only a legal and restricted subset of all - so it
will not use all of the local possible frequencies.
■
Enter the
SSID
(Fig. 133 /2) of the wireless network.
■
Enter the
Password
(Fig. 133 /3) of the wireless network.
■
To go back to the last saved settings click the
Reset
■
To save all the settings in the device click the
Save
