HELLA Aglaia Advanced People Sensor Installation And Configuration Manual Download Page 149

Page: 149 / 179

149 / 179

The reproduction, distribution and utilization of this document as well as the communication of its contents to others without

express authorization is prohibited. Offenders will be held liable for the payment of damages.

21.04.2020

Version 1.18.0

Cleaning, maintenance and troubleshooting

APS-90, APS-180 and APS-90-Outdoor-PoE

Fault description

Cause

Remedy

If checks are negative, reconfigure the

device.

Modified mounting position

Check in the user interface:

■

If the adjusted pitch and yaw angle still

correspond to the values measured on

the device.

■

If the applied height still corresponds to

the value measured on the device.

If the checked values differ, reconfigure the

device.

Dirty lens cover plate

Clean lens cover plate.

Summary of Contents for Advanced People Sensor




















































































































































































Search results

Summary of Contents for Advanced People Sensor

Reviews:

Related manuals for Advanced People Sensor

Brands by name

Popular brands

HELLA Aglaia Advanced People Sensor, Installation And Configuration Manual

Search results

Summary of Contents for Advanced People Sensor

Reviews:

Related manuals for Advanced People Sensor

Brands by name

Popular brands