HELLA Aglaia Advanced People Sensor, Installation And Configuration Manual

Page: 104 / 179

104 / 179 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without
express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design. 21.04.2020
Version 1.18.0
Configuration
APS-90, APS-180 and APS-90-Outdoor-PoE
Fig. 96: Select master device
■ To select the master device mark a device (Fig. 96 /1) and click the Select button
(Fig. 96 /3).
■ To leave the window without selecting a device click the Abort button (Fig. 96 /2).
■ To set the IP address of the master device manually click the edit button (Fig. 95 /2)
and set the IP address.
■ When the slave connects to the master the status (Fig. 95 /5) changes to working .
■ The hostname (Fig. 95 /4) and the IP address (Fig. 95 /3) of the connected master are
shown.
6.5.3 Complete the setup
When the slaves are connected to the master, finish the setup with the automatic configu-
ration. Choose a configuration mode (

Automatic configuration on page 82).
Fig. 97: Automatic Configuration
■ To start the configuration click the related Start button (Fig. 97 /1). The button
changes to abort.
■ To abort the configuration click the Abort button (Fig. 97 /2).
■ See the State of the configuration (Fig. 97 /3). During the configuration the state
changes from Running to Working when finished.
■ See the Progress (Fig. 97 /4) as an indication for the remaining time.
■ The configuration is finished when the status of the slaves in the Slave Devices topic
changes to configured .