HELLA Aglaia Advanced People Sensor Installation And Configuration Manual Download Page 33

Page: 33 / 179

33 / 179

The reproduction, distribution and utilization of this document as well as the communication of its contents to others without

express authorization is prohibited. Offenders will be held liable for the payment of damages.

21.04.2020

Version 1.18.0

Structure and function

APS-90, APS-180 and APS-90-Outdoor-PoE

3.2.7

Video recording

Optional function
This function can only be enabled if a corresponding license file is

installed on the device.

Customers are recommended to record videos including data (e.g. count data) to validate

the accuracy of the sensor. It is an easier solution than validating live on site, due to the

large amount of statistically relevant information produced in real time.

The APS models with additional memory (



table below) can store this video data locally.

After being recorded, the data can be automatically sent to a server, or manually down-

loaded from the user interface.

Model

Video recording possible license preinstalled

APS-90E

yes

APS-90

APS-90-8GB

yes

APS-180E

yes

APS-180

APS-180-8GB

yes

APS-90-Outdoor-PoE

yes

In addition to the camera image, this video recording also includes the relevant setup,

counting, zone monitoring and tracking data.

The license can be deleted in case of privacy protection issues.

Summary of Contents for Advanced People Sensor




















































































































































































Search results

Summary of Contents for Advanced People Sensor

Reviews:

Related manuals for Advanced People Sensor

Brands by name

Popular brands

HELLA Aglaia Advanced People Sensor, Installation And Configuration Manual

Search results

Summary of Contents for Advanced People Sensor

Reviews:

Related manuals for Advanced People Sensor

Brands by name

Popular brands