HELLA Aglaia Advanced People Sensor Installation And Configuration Manual Download Page 81

Page: 81 / 179

81 / 179

The reproduction, distribution and utilization of this document as well as the communication of its contents to others without

express authorization is prohibited. Offenders will be held liable for the payment of damages.

21.04.2020

Version 1.18.0

Installation

APS-90, APS-180 and APS-90-Outdoor-PoE

Requirements

Installation

Basic configuration master

■

For the selection of the installation site it is important that the monitored areas of the

individual devices overlap by at least 100 cm or 3.3 ft (Fig. 63 /1).

■

DNS Service Discovery is available in the network.

■

All devices have activated DNS-SD.

Fig. 63: Overlapping of areas

To perform a Multi Sensor Fusion proceed as follows:
Installation of all devices

Calculate the position of the devices.
Install the devices.
Configure the devices with the installation height and the pitch and yaw angle.
Configure the floor area of the devices.
Activate DNS-SD for all devices.

Configuring the master

Configure one device as master.
Scan for slave devices.



List of all devices in the network are shown.

Select all slave devices.

1.
2.
3.
4.
5.

1.
2.

Summary of Contents for Advanced People Sensor




















































































































































































Search results

Summary of Contents for Advanced People Sensor

Reviews:

Related manuals for Advanced People Sensor

Brands by name

Popular brands

HELLA Aglaia Advanced People Sensor, Installation And Configuration Manual

Search results

Summary of Contents for Advanced People Sensor

Reviews:

Related manuals for Advanced People Sensor

Brands by name

Popular brands