HELLA Aglaia Advanced People Sensor, Installation And Configuration Manual

Page: 97 / 179

97 / 179 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without
express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design. 21.04.2020
Version 1.18.0
Configuration
APS-90, APS-180 and APS-90-Outdoor-PoE
If measurement is not possible - e.g. a consistently level floor area is not
big enough - the device presents a ‘not available’ hint (Fig. 81 /1). In this
case use a separate measuring device and set up the values manually.
The height is the distance between the device level and the floor level.
■ To perform a new measurement click the Refresh button (Fig. 81 /3).
■ To apply the measured values click the Save Auto Calibration button (Fig. 81 /6).
■ Set up the values manually for the pitch (Fig. 81 /8) and yaw (Fig. 81 /7) angle or the
height (Fig. 81 /10) by inputting a value directly into the input field (Fig. 81 /9) or using
the spin control (Fig. 81 /2).
■ To go back to the last saved settings click the Reset button (Fig. 81 /4).
■ To save all the settings in the device click the Save button (Fig. 81 /5).
6.4.2 Height Range
Define the height range for the APS. The displayed ranges depends to the used device.
Low range
■ 2 m to 2,5 m for APS-90 and APS-90-Outdoor-PoE
■ not available for APS-180
Standard range
■ 2,3 m to 4 m for APS-90 and APS-90-Outdoor-PoE
■ 3 m to 6 m for APS-180
Extended range
■ 3,5 m to 6 m for APS-90 and APS-90-Outdoor-PoE
■ 5 m to 9 m for APS-180