HELLA Aglaia Advanced People Sensor, Installation And Configuration Manual

Page: 112 / 179

112 / 179 The reproduction, distribution and utilization of this document as well as the communication of its contents to others without
express authorization is prohibited. Offenders will be held liable for the payment of damages.
All rights reserved in the event of the grant of patent, utility model or design. 21.04.2020
Version 1.18.0
Configuration
APS-90, APS-180 and APS-90-Outdoor-PoE
■ To activate Video recording select Video Recording (Fig. 109 /13) on.
■ See the state of recording (Fig. 109 /12).
■ Choose a Resolution (Fig. 109 /11) from the drop down list.
■ Choose a Frame rate (Fig. 109 /10) from the drop down list.
■ Choose a Bitrate (Fig. 109 /9) from the drop down list.
■ To start a manual recording click the Start button (Fig. 109 /1).
■ To end a manual recording click the Stop button (Fig. 109 /2).
■ To activate an automatic recording tick Time Triggered Rec. checkbox (/3).
■ Set up a Start Date (Fig. 109 /4) and the Start Time (Fig. 109 /5) for automatic
recording.
■ Set up a Duration (Fig. 109 /6) in minutes. This duration sets the maximum time that
the counter will record. The value must be between 1 and 1000 min.
■ To go back to the last saved settings click the Reset button (Fig. 109 /7).
■ To save all the settings in the device click the Save button (Fig. 109 /8).
6.8.2 Video streaming
The device can stream live camera images over the network. Configure the video mode,
resolution, rates and the used port for the stream.
Fig. 110: Video Feature - Video Streaming