![background image](http://html.mh-extra.com/html/heidenhain/tnc-620-programming-station/tnc-620-programming-station_user-manual_2118726007.webp)
TNC model, software and features
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
7
TNC model, software and features
This manual describes functions and features provided by controls
as of the following NC software numbers.
TNC model
NC software number
TNC 620
817600-04
TNC 620 E
817601-04
TNC 620 Programming Station
817605-04
The suffix E indicates the export version of the TNC. The following
software options are not available in the export version:
Advanced Function Set 2 (option 9)
The machine manufacturer adapts the usable features of the TNC
to his machine by the setting machine parameters. Some of the
functions described in this manual may therefore not be among the
features provided by the TNC on your machine.
TNC functions that may not be available on your machine include:
Tool measurement with the TT
In order to find out about the actual features of your machine,
please contact the machine manufacturer.
Many machine manufacturers, including HEIDENHAIN, offer
programming courses for the TNCs. Participation in one of these
courses is recommended to familiarize yourself thoroughly with the
TNC functions.
Cycle Programming User's Manual:
All of the cycle functions (touch probe cycles and
fixed cycles) are described in the Cycle Programming
User's Manual. If you need this user's manual,
please contact HEIDENHAIN if required. ID:
1096886-xx
Summary of Contents for TNC 620 Programming Station
