HEIDENHAIN TNC 620 Programming Station, User Manual

Page: 232 / 695

Tools
5.4 Tool management (option number 93)
5
232
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
The CSV file to be imported must be stored in the
TNC:\system\tooltab
directory.
If you import the tool data of tools whose
numbers are in the pocket table, the TNC issues
an error message. You can then decide whether
you want to skip this data record or insert a new
tool. The TNC inserts a new tool into the first
empty line of the tool table.
If the imported CSV file includes additional table
columns unknown to the control, a message is
displayed during import specifying these unknown
columns and indicating that these values will not
be adopted.
Make sure that the column designations have
been specified correctly.
Further Information: "Enter tool data into the
table", page 200
You can import any tool data, the associated data
record does not have to contain all the columns
(or data) of the tool table.
The column names can be in any order, the data
must be defined in the corresponding order.
Sample import file:
T,L,R,DL,DR
Line 1 with column names
4,125.995,7.995,0,0
Line 2 with tool data
9,25.06,12.01,0,0
Line 3 with tool data
28,196.981,35,0,0
Line 4 with tool data