HEIDENHAIN TNC 620 Programming Station, User Manual, Page: 478 / 695

Pallet management
13.1 Pallet management (option number 22)
13
478
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
Selecting pallet table
Select file manager in
Programming
mode or the Program Run
operating modes: Press the
PGM MGT
key
Display type .P files: Press the
SELECT TYPE
soft key and
SHOW
ALL
soft key
Select a pallet table with the arrow keys, or enter a new file
name to create a new table
Confirm your entry with the
ENT
key
Use the screen layout key to switch between table
view and list view
Exit pallet table
To call the file manager, press the
PGM MGT
key
To select a different type of file, press the
SELECT TYPE
soft key
and the soft key for the desired file type, e.g.
SHOW .I
Select the desired file
Processing pallet table
MP7683 defines whether the pallet table is to be
executed blockwise or continuously.
In the
Program run, full sequence
or
Program run, single
block
operating mode, select the file manager: Press the
PGM
MGT
key
Display all type .P files: Press the
SELECT TYPE
and
SHOW .P
soft keys
Select a pallet table with the arrow keys
Press the
ENT
key
Execute the pallet table: Press the
NC START
key