![background image](http://html.mh-extra.com/html/heidenhain/tnc-620-programming-station/tnc-620-programming-station_user-manual_2118726532.webp)
Manual Operation and Setup
14.9 Compensating workpiece misalignment with 3-D touch probe
(option 17)
14
532
HEIDENHAIN | TNC 620 | ISO Programming User's Manual | 9/2016
The TNC saves the 3-D basic rotation in the columns SPA, SPB or
SPC of the preset table.
Aligning 3-D basic rotation
If the machine has two rotary axes and the probed 3-D basic
rotation is activated, you can align the rotary axes with reference to
the 3-D basic rotation using the
ALIGN ROT.
soft key.Align
ALIGN
ROT. AXES
. In such cases, Tilted Working Plane becomes active for
all machine operating modes.
After aligning the plane, you can align the reference axis with the
Probing rot
function.
Displaying 3-D basic rotation
When a 3-D basic rotation is saved in the active datum, the TNC
shows the
symbol for the 3-D basic rotation in the status
display. The TNC traverses the machine axes according to the 3-D
basic rotation.
Canceling a 3-D basic rotation
Select the probe function by pressing the
PROBING PL
soft key
Enter 0 for all angles
Press the
SET BASIC ROTATION
soft key
To terminate the probe function, press the
END
soft key
Summary of Contents for TNC 620 Programming Station
