User Manual Version 3.1
23
2: Ink costs and ink range
This line shows one of the following information:
InkCosts/Job
Calculates and shows the cost of ink for
the current print job in the set currency.
Costs/1000Pg
Calculates and shows the cost of ink
per 1,000 pages of the current print job.
Pages/Cartr.
Calculates and shows the number of
pages you can print, of the current print job, with the
remaining amount of ink in the cartridge.
Please consider that the information above are
calculated average values only. Therefore the
accuracy of the values will increase as more pages are
printed.
To show information in this line, you first have to set
a cost per cartridge greater than zero. To do this,
select this line and hit the Ok key. Or you can open
the main menu of the printer and select the following
menu:
PRINTER CONFIG.
>
INK
>
INK COST CONFIG.
3: Transport speed
This line shows the currently set transport speed. To
change the speed, select this line and use the arrow
right or arrow left
key to change it. Please note
that the speed is limited by the currently set print
quality (see line 6). E.g. with a print quality of 6 x 6
dpi, the maximum speed is 0.540 meter/second.
4: Throughput
This lines shows one of the following information:
Pages/h:
Shows the current throughput of the
machine, calculated from the last few pages.
JOB Pages/h:
Shows the average throughput since
the beginning of this print job. This is a valuable
information to measure the actual productivity of the
machine.
5: Ink type
This line shows the currently set ink type.
6: Print quality
This lines shows the currently set print quality. To
change the quality select this line and use the arrow
right or arrow left
key to change the quality.
Please note that the selected print quality determines
the maximum speed of the machine.
This setting can be locked, so that a print quality
setting, send from the PC is ignored. To lock this
setting, select this line and press the Ok key for
four seconds. A
±
symbol appears next to the quality
setting, showing that it is locked now.
To unlock the setting select this line again and press
the Ok key for four seconds. The
±
symbol
disappears again.