50
User Manual Version 3.1
ADJUST TOF
The “Top of form” (TOF) sensor or paper sensor detects the edge of every fed paper and
controls the timing of the print heads. To ensure a correct positioning of the printed image
an adjustment value is set in this menu.
To make an adjustment press Quick
+
(Test Print). The HJ930 will now print an
adjustment page with the one print cartridge, closest to the feeder. Measure the distance
between the paper edge and the printed bars. See Figure 23 below. Enter the measured
distance in the printer menu and press the Ok button.
Figure 23: ADJUST TOF test print
Pos: 60.25 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Menü_Drucker_Warning_Factroy_setting @ 1\mod_1259054235982_912.doc @ 7641 @
Factory setting
This is a default setting, entered at the initiation of the machine in the
factory. The user should change this setting only in case of a printer
malfunction and after consulting a technician.
Pos: 60.26 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü2/Ü2_1500_BOOT_DEFAULTS @ 0\mod_1254483976902_912.doc @ 4057 @
BOOT DEFAULTS
All settings made in this menu apply for all print jobs and are retained after switching off
the printer.
•
Select
BOOT DEFAULTS
in the
PRINTER CONFIG.
menu and hit the Ok key. You will
be presented the following choices:
Pos: 60.27 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Menü_Drucker_Hinweis_BOOT DEFAULTS settings remain after printer reset @ 2\mod_1275288488760_912.doc @ 17703 @
BOOT DEFAULTS settings remain after printer reset
The settings in the
BOOT DEFAULTS
menu cannot be changed by
resetting the machine (neither by a "Non-Mechanical Reset" nor by a
"Defaul Reset"). The boot default settings have to be changed in the
BOOT DEFAULTS
menu.
Pos: 60.28 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1504_PC PROGRAMM @ 0\mod_1254489913867_912.doc @ 4168 @