User Manual Version 3.1
43
PAPER MEASUREMENT
The printer will measure the paper width.
Therefore please put one sheet of paper in the feeding position. After the measurement the
printer will display the detected paper width.
If you wish to lock the measured value in the printer, press the Ok button for 2 seconds
(the PC software settings will not affect the printer set values).
You can also use the following key combinations:
Quick + (short) = PAPER MEASUREMENT
Quick + (long) = PAPER MEASUREMENT (locked)
Pos: 60.7 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Quick Menü/Ü2_6007_RUN PAPER @ 0\mod_1254923965108_912.doc @ 5282 @
RUN PAPER
The printer will feed and transport paper continuously until you hit the Cancel key.
•
Select
RUN PAPER
in the
QUICK MENU
and hit the Ok key.
•
Hit the Cancel key to stop the printer.
You can also use the following key combination:
Quick
+ Arrow left (long) = RUN PAPER
Pos: 60.8 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Quick Menü/Ü2_6009_TEST PRINT @ 0\mod_1254923966653_912.doc @ 5286 @
TEST PRINT
The printer will do test prints with the set test pattern. To see which pattern is set go to the
menu
SERVICE > SELECT TEST PATT.
Please hit the Cancel key to stop the printer.
•
Select
TEST PRINT
in the
QUICK MENU
and hit the Ok
key.
•
Hit the Cancel key to stop the printer.
You can also use the following key combination:
Quick
+ Arrow up (long) = TEST PRINT
Pos: 60.9 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Quick Menü/Ü2_6010a_CLEAN HEADS_830/930/960/990/Orbit/OrbitB @ 1\mod_1257425319325_912.doc @ 7249 @