148
User Manual Version 3.1
6. Starting the
printer for the
first time after
the update
•
If you were updating from a firmware version < 4.7 then perform
the steps below. If not continue with step “7. Checking the
firmware version”.
•
Press and hold the Home key and turn on the printer. This
will perform a default reset.
•
Keeping holding the Home key until the printer shows
Printer Name
Default Reset
•
Use the Setting Dump, printed at the beginning of this process,
to set the previous mechanical alignment values.
7. Checking
the firmware
version
•
Check the now installed firmware version in the printer menu:
SERVICE > CONFIGURAT. INFO > Firmware:
•
Now the firmware update is completed.
IMPORTANT!
If an error message appears during the update process, just turn the
printer off and on. Check if you are sending a compatible Flashware
file. Try to resend the file.
Pos: 101 /Bedienungsanleitungen/Geräte spezifisch/Drucker/11_x_Ü2_Additional information texts in main display_Table_Top_printers @ 2\mod_1271235880723_912.doc @ 14712 @ 2
