User Manual Version 3.1
53
s SPOT COLOUR
Spot Color ink cartridge
q IMS INK
IMS ink cartridge
Special application ink for printing on difficult
substrate. Please read the additional operation
instructions for this ink typ.
u USER INK
Not optimized default parameter.
This parameter can be used for all not Hasler
approved inks.
Default:
d BLACK DYE
Always set the ink type according to your actually used ink!
The different parameters are optimized for these types.
Wrong assignations can lead to overheating and damage of the
cartridges.
Pos: 60.34 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1602_RESET INK LEVEL_non-Shuttlehead @ 0\mod_1254908139920_912.doc @ 4737 @
RESET INK LEVEL
This feature is used to reset the calculated ink level of a cartridge. Choose
All Units
for a
total reset or select individual cartridges to restore their ink level.
This reset should only be done when inserting a new, full cartridge. Otherwise the ink level
bar in the display will not show a correct filling level.
This feature is only accurate if it is used correctly. When cartridges
are removed for cleaning and storage they must be returned to the
location they were originally installed.
Suggestion: Label each cartridge (
U1C1
,
U1C2
, …)
When a new cartridge is installed the ink level for the corresponding
cartridge position must be reset.
Pos: 60.35 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1603_INK COST CONFIG._without_Bulk @ 0\mod_1254908139420_912.doc @ 4729 @
INK COST CONFIG.
This feature is used to set all parameters required for the
InkCosts/Job
, the
Costs/1000Pg
and the
Pages/Cartr.
counters.
Parameter Note
COSTS/CARTRIDGE
Here you can enter the cost per ink cartridge.
Default:
0
CURRENCY
Here you can choose which currency symbol is shown
in the display:
€ Euro
$ Pound
£ Pound
¥ Yuan
other
Default:
€ Euro
