User Manual Version 3.1
115
Pos: 79 /Bedienungsanleitungen/Geräte spezifisch/Drucker/8.x_Ü2_Warning_Messages @ 2\mod_1265641665046_912.doc @ 11623 @ 2
8.5
Warning Messages
Pos: 80 /Bedienungsanleitungen/Geräte spezifisch/Drucker/8.x_Ü3_How to read a warning message entry @ 2\mod_1277218478098_912.doc @ 18855 @ 3
8.5.1
How to read a warning message entry
•
Protocol code:
Two digit number that is sent by the printer via the serial interface when this warning
occurs.
•
Display message:
Text that is shown in the printer display. The text in the display always includes the
warning code (two letters) as reference for the operator.
•
Cause:
What caused this warning.
•
Elimination:
Steps the operator can take to avoid this warning.
Pos: 81.1 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Warning Messages/AA_Warning:Non-Existent_Font_Selected! @ 2\mod_1265634364380_912.doc @ 11492 @
Protocol
code
Display message
Cause
13 Warning:non-existent
font
selected!
CODE: AA
Selected font does not exist in the
printer and the menu
SOFT FONT
ERROR
is set to
cont. print
Attention! This setting can
cause faulty data in the
printouts. Check the following
pages for garbage characters!
Elimination
•
Do not repeat pages after a
job has ended
•
Do not turn off the printer
during job data transfer
•
Unlock the font in the printer
menu
•
To interrupt a print job use
the Cancel
and the Ok
keys on the printer
Pos: 81.2 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Warning Messages/AB_Warning:Non-Existent_Macro_Selected! @ 2\mod_1265634652878_912.doc @ 11496 @
Protocol
code
Display message
Cause
14 Warning:non-existent
macro
selected!
CODE: AB
Selected macro does not exist in
the printer
Elimination
•
Do not repeat pages after a
job has ended
