36
User Manual Version 3.1
5.6
Width measurement of the print media
The printer permanently controls the size of the fed products. Therefore the HJ930 needs
to know the dimension of the paper at the beginning of a new print job. The dimension can
either be measured manually or be send by a PC software. The dimension values are stored
in the memory of the printer as reference values, until new dimensions are measured.
PC software
Sending the correct paper dimensions to the printer, is only available
in PC software designed to work together with this Hasler printer.
When you are using a PC software that is able to send the paper dimension, you do not
need to measure the paper size manually.
•
Measure the paper dimension manually
Put one media into the feeder and proceed as described in chapter Fehler!
Verweisquelle konnte nicht gefunden werden., on page Fehler! Textmarke
nicht definiert..
•
Set paper dimensions in PC software
Please refer to the manual of your PC software.
Pos: 54 /Bedienungsanleitungen/Geräte spezifisch/Drucker/5.7_Ü2_How to set the print direction @ 1\mod_1260881170148_912.doc @ 8511 @ 2
5.7
How to set the print direction (orientation)
Depending of the direction in which the products are fed into the printer, it could become
necessary to turn the direction of the printed image by 180°. The Hasler HJ930 has a
built-in feature that automatically turns the printed image by 180°. This adjustment can
either be set directly in the printer menu, in the software application used to send the data
to the printer or in the printer driver.
Software application and printer driver
Setting the print direction (orientation), is only available in software
applications and printer drivers designed to work together with Hasler
printers.
•
Set the print direction in the printer driver
Please check the setting of your driver.
Pos: 55 /Bedienungsanleitungen/Geräte spezifisch/Drucker/5.7_How to set the print direction_Verweis_Fixed Head Printer/AS-Orbit/AS-OrbitBase @ 2\mod_1276076390012_912.doc @ 18021 @
•
Set the print direction (orientation) in the printer menu ORIENTATION, on page 59 for
more details.
•
Set the print direction (orientation) in software application
Please refer to the manual of your software application.
Pos: 56 /Bedienungsanleitungen/Geräte spezifisch/Drucker/5.9_Ü2_Test print_AS-830/930/960/990 @ 2\mod_1269248556360_912.doc @ 13721 @ 2
