User Manual Version 3.1
59
Use this feature to set the behaviour of the printer when no more material is being fed
during and if the printer should continue to run after a print job was finished.
Option Note
on
No more material is fed during a print job:
The printer will show
NoPaper
in the main display view
and after a short while the printers stops and shows
the error message
NO PAPER !! CODE 01
.
Print job finished:
The printer will stop.
off
No more material is fed during a print job:
The printer will show
NoPaper
in the main display view
but will continue to run until either material is fed
again (feeder refilled) or the Cancel key is pressed.
Print job finished:
The printer will continue to run until the Cancel key
is pressed.
Default:
on
Pos: 60.53 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü2/Ü2_2300_LAYOUT @ 0\mod_1254831971240_912.doc @ 4345 @
LAYOUT
Here you can configure different layout settings directly in the printer menu. These manual
settings were made for users that print out of Microsoft DOS applications.
All functions in the following submenus are obsolete for users, who
use a modern Microsoft Windows computer with layout softwares like
“Flexmail” or “BulkMailer”. In those cases all layout information is
included in the print job, that is sent from PC to the printer.
Pos: 60.54 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_2301_ORIENTATION_Fixed Head/AS-Orbit/AS-OrbitBase @ 1\mod_1257267215646_912.doc @ 7211 @
ORIENTATION
This feature is used to turn the whole print image by 180°.The print layout on the PC can be
edited in the normal view, while the printouts will be done reversed.
Figure 24: Difference Nor/Rev
Rev, Nor
Default:
Nor
Pos: 60.55 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_2302_PAPER SIZE @ 0\mod_1254914550424_912.doc @ 4911 @
