Harmonic MediaGrid Installation And Configuration Manual Download Page 36

Page: 36 / 358

Chapter 2 System Installation with the Content-
Server 4000 Series

Harmonic MediaGrid Release 4.1

Rack Mounting the Harmonic MediaGrid 4000 Series System

Repeat

Step a

through

Step e

to install the other inner rail.

2. On each outer rail, press the locking tab and push the middle rail toward the back of the rail

to collapse the rail assembly.

NOTE:

If your rack system has round holes, follow instructions provided in the mounting kit to install

adapters and then mount the rails to the rack. Then, continue to

Step 5

3. Install the left outer rail onto the racking unit as follows:

a. Push the front bracket to unlock it.

b. Guide the bracket hooks through the rack holes, and then press down firmly.
c. (Secure the rail to the front of the rack with two screws.

Summary of Contents for MediaGrid





































































































































































































































































































































































Search results

Summary of Contents for MediaGrid

Reviews:

Related manuals for MediaGrid

Brands by name

Popular brands

Harmonic MediaGrid, Installation And Configuration Manual

Search results

Summary of Contents for MediaGrid

Reviews:

Related manuals for MediaGrid

Brands by name

Popular brands