Appendix A Legacy Hardware Platforms
© 2017 Harmonic Inc. All rights reserved.
319
Harmonic MediaGrid Release 4.1
ContentBridge 2010B/C/D (High Bandwidth)
10 Gigabit Ethernet LEDs
Figure A–18
and
Table A–21
describe the possible states of the 10 Gigabit Ethernet LEDs.
Figure A–18: 10 Gigabit Ethernet LEDs
2. Video connector
Use to connect a monitor to the system (for maintenance
only).
3. USB connectors (2)
Used for maintenance purposes only.
4. Gigabit Ethernet ports
Unused
5. 10 Gigabit Ethernet LEDs
The LEDs show the state of the 10 Gigabit Ethernet
connector. For a description of the LEDs and possible
states, refer to
Figure A–18
and
Table A–21
.
6. 10 Gigabit Ethernet connector
Use to connect the ContentBridge to the customer
network switch.
The Link light does not appear until the Configuration
Assistant is completed for the ContentBridge. Refer to
About Harmonic MediaGrid Configuration
information.
7. System status indicator
Blinks when the front or back system identification button
is pressed.
8. System identification button
Both the SystemManager application and the
identification buttons on the front and back panels can be
used to locate a particular system within a rack. When
one of these buttons is pressed, the LCD display on the
front of the device and the blue system status indicator
on the back blink until one of the buttons is pressed
again.
10. Power supply 1
Dual redundant power supplies provide power to the
system.
11. Power supply 2
Table A–20: ContentBridge 2010B/C/D Rear panel components
continued
Indicator, Button, or Connector
Description
Receive
Activity
Transmit
Link
