Chapter 3 System Installation with the Content-
Server 3000 Series
© 2017 Harmonic Inc. All rights reserved.
84
Harmonic MediaGrid Release 4.1
Rack Mounting the Harmonic MediaGrid 3000 Series System
Figure 3–15: Installing chassis to fixed slides
5. Pull the blue release button in the inner member to release the lock and allow the chassis to
slide into the rack.
6. Install the bottom-most screw at the front to secure the chassis to the rack.
Installing the bezel on the ContentDirector 1000F/2000C and ContentBridge 2010F
Align the bezel in front of the chassis so that the Harmonic logo is positioned in the top left
corner.
CAUTION:
The front panel is susceptible to electrostatic discharge (ESD) when the bezel is removed.
Wear the appropriate ESD protection.
1. Connect the USB cable inside the bezel to the right-hand USB port on the front panel.
2. Keeping the corners aligned, press the bezel straight onto the chassis.
The USB cable will form a loop that fits inside the metal panel of the bezel.
3. Hand-tighten the two captive thumb screws to secure the bezel in place.
