Appendix A Legacy Hardware Platforms
© 2017 Harmonic Inc. All rights reserved.
306
Harmonic MediaGrid Release 4.1
ContentDirector 1000E and High Performance ContentDirector 2000B
Drive Status LEDs
Figure 9–5
and
Table 9–6
describe the drive indicators and their functions.
Figure 9–5: ContentDirector Drive Indicators
Table 9–6: Drive-status Indicator Pattern (RAID Only)
5. LCD display
Displays system ID, status information, and system error
messages. The LCD lights blue during normal system
operation. The LCD lights amber when the system needs
attention, and the LCD panel displays an error code
followed by descriptive text.
6. USB connectors
Use to connect the front bezel.
7. Optical drive
Use for software installation.
8. Hard drive 0
Refer to
Table 9–6
for a description of the indicator codes.
9. Hard drive 1
10. Solid state drive
Available only in the High Performance ContentDirector
2000B.
Drive-status Indicator Pattern
Condition
Blinks green two times per second
Identify drive/preparing for removal
Off
Drive ready for insertion or removal
Note
: The drive-status indicator remains off until all hard
drives are initialized after system power is applied. Drives
are not ready for insertion or removal during this time.
Blinks green, amber, and off
Drive predicted failure
Blinks amber four times per
second
Drive failed
Blinks green slowly
Drive rebuilding
Steady green
Drive online
Blinks green three seconds,
amber three seconds, and off six
seconds
Rebuild aborted
Indicator, Button, or Connector
Description
Drive-activity Indicator (green)
Drive-status Indicator (green and amber)
