CLI Command Reference
stream
Makito User’s Guide, v2.1.0, Issue 01
242
program
1
(Optional) Program Identifier used in the
Program Map Table (PMT) of the TS stream.
0..65535
tsid
0
(Optional) Transport Stream ID. Identifies the
transport stream in the Program Association
table (PAT) of the TS stream.
0..65535
stillimage
n/a
(Optional) Specifies the filename of a static
image that will replace the “real” video stream
when streaming is paused.
NOTE:
The static image file must already
have been converted into a file containing an
encoded single H.264 GOP sequence. You
command, or the
Web interface
M
EDIA
S
ETTINGS
page
(
see
102).
shaping
no
(Optional) To enable Traffic Shaping for the
stream, specify
shaping=yes
.
For some limited networks such as satellites
or some dedicated network pipes, it may be
necessary to enable Traffic Shaping to
smooth the traffic and respect the absolute
upper limit configured.
NOTE:
Using Traffic Shaping on streams
above 7Mbps will create audio/video artifacts.
ceiling
n/a
(Optional,
shaping
must be
yes
) The
percentage of network bandwidth beyond the
average rate that the encoder is allowed to
use if needed. This is used to set the ceiling
bandwidth range.
0..100%
, default =
15
NOTE:
To configure the ceiling percentage
for CBR streams with metadata, see
Percentage for CBR Streams with Metadata”
idlecells
no
(Optional,
shaping
must be
yes
) When
enabled, Idle TS cells will be inserted into a
TS stream when necessary.
yes,no
username
n/a
(Required when streaming to a CDN using
RTMP) Enter the CDN login username.
password
n/a
(Required when streaming to a CDN using
RTMP) Enter the CDN login password.
Parameter
Default
Description/Values (Continued)