manualshive.com logo in svg

Haivision Makito, User Manual, Page: 199 / 294

Share
Download
Haivision Makito User Manual Download Page 199

CLI Command Reference 

ethercfg

Makito User’s Guide, v2.1.0, Issue 01

199

ethercfg

S

YNOPSIS

ethercfg [-a on|off] [-s 10|100|1000] [-d half|full] [-c bandwidth] [-w yes| no]

D

ESCRIPTION

The 

ethercfg

 command is used to view, manually control, and save the Ethernet configu-

ration parameters.

When the Makito

 

boots up, it automatically initializes and configures the Ethernet interface 

to match the settings on the Ethernet switch to which it is connecting. However, you may 
need to disable autonegotiation, and manually force settings such as the Ethernet interface 
line rate and duplex mode. 

If no options are specified, the system displays the current settings, for example:

O

PTIONS

NOTE  

Always enable autonegotiation with Gigabit Ethernet (GigE) speed (1000 Mbps).

ETHERCFG 

E

XAMPLE

# ethercfg -s 100

Sets the line speed to 100 Mbps (and in doing so, 

disables autonegotiation, see example below).

-a

--autoneg

Enables or disables autonegotiation

-s

--speed

If autonegotiation is disabled, sets the speed

-d

--duplex

If autonegotiation is disabled, sets the duplex mode

-c

--ceiling

Puts a “ceiling” (in kbps or Mbps) on the bandwidth 
available to the Ethernet port

-w

--write

Skips the save settings prompt

Summary of Contents for Makito







































































































































































































































































































Reviews:

No comments