CLI Command Reference
messages
Makito User’s Guide, v2.1.0, Issue 01
207
messages
S
YNOPSIS
messages add <msgtext>
messages get
messages delete
D
ESCRIPTION
The
messages
command is used to manage administrative login messages. This is a log
of a limited number of important events recorded such as installation of a software package,
failure to establish or maintain connectivity with a remote audit server, Power-On Self Test
(POST) errors, and other noteworthy events that require the administrator’s attention.
These events will result in a message being sent directly to all logged-in administrators and
will appear on their terminals. The message will also be displayed at the next administrative
Web Interface or CLI login.
NOTE
The
messages
command can only be used by the Administrator.
Messages starting with “POST” are Power-On Self Test events. If you repeatedly get
POST errors, the cryptographic module of the encoder may be compromised, and it is
recommended to re-installed the firmware.
A
CTIONS
S
EE
A
LSO
•
add <msgtext>
Adds the message text to the log.
This could be used to send messages to other administrators.
get
Displays messages.
delete
Deletes the messages.
