manualshive.com logo in svg

Haivision Makito, User Manual, Page: 103 / 294

Share
Download
Haivision Makito User Manual Download Page 103

Managing the Encoder 

Configuring Media Effects

Makito User’s Guide, v2.1.0, Issue 01

103

5.

To delete an image file from the list of available Still Images, click 

 

next to the Still Image field.

6.

To apply your changes, click 

.

NOTE  

The resulting still image files are stored on the Makito file system in the folder 

/usr/share/haivision/still_images

.

Image Snapshot Capture

NOTE  

Snapshot Capture is an optional feature which may be disabled at the factory. The 

following section is only applicable if snapshots are enabled.

From the 

M

EDIA 

S

ETTINGS

 page, you can take a snapshot of your video input and save it to 

either .jpg or .yuv image format. With .jpg snapshots, you can also specify the image 
quality. 

When you take a snapshot, a unique snapshot name will be generated based on the current 
time if NTP (Network Time Protocol) is enabled, or a simple index such as 

snap-1.jpg

 if 

NTP is not enabled.

Thumbnails of the snapshots are displayed below the configuration fields for you to view 
and optionally save.

Note that the encoder must have a valid Input Format. To verify the Input Format detected 
by the system, see 

“Configuring the Video Settings”

 on page

 

71.

NOTE  

Snapshot files are stored on the Makito file system under 

/usr/share/haivision/snapshots

.

Summary of Contents for Makito







































































































































































































































































































Reviews:

No comments