Haivision Makito User Manual Download Page 186

Page: 186 / 294

CLI Command Reference

audenc

Makito User’s Guide, v2.1.0, Issue 01

186

NOTE

If you are using HaiPLAY as the decoder, you will need to change the default audio

algorithm

parameter setting to

mpeg4adts

, because HaiPLAY only supports MPEG4

ADTS encapsulated audio.

Makito-SDI

•

SDI1CH12

- SDI Audio Group 1, Ch. 1-2

•

SDI1CH34

- SDI Audio Group 1, Ch. 3-4

• Analog

level

The maximum analog Audio Input level from

+5dBU up to +20dBU.

NOTE:

Only applies to Analog Audio Input.

mode

stereo

The number and type of audio channels to

encode.

mono, stereo

TIP:

If you set the

bitrate

to 32 kbps, use

mono

algorithm

mpeg2adts

The audio compression algorithm:

•

[mpeg2]adts

- Encodes audio using the

ISO/IEC 13818-7 MPEG-2 AAC-LC

algorithm with an ADTS header. (Default)

•

mpeg4adts -

Encodes audio using the

ISO/IEC 14496-3 MPEG-4 AAC-LC

algorithm with an ADTS header.

•

loas

- Encodes audio using the ISO/IEC

14496-3 MPEG-4 AAC-LC algorithm with a

LOAS/LATM header.

•

raw

- Encodes audio using the ISO/IEC

14496-3 MPEG-4 AAC-LC algorithm

without any encapsulation.

bitrate

128 kbps

The Audio Bitrate for the encoder.

32..448

kbps.

NOTE:

At low bitrates such as 32 kbps, the

audio quality may not be optimal. See

mode

above.

SampleRate

48 kHz

(Read-only) The number of audio samples

per second taken from the incoming signal.

kHz only.

Parameter

Default

Description/Values (Continued)

Summary of Contents for Makito







































































































































































































































































































Search results

Summary of Contents for Makito

Reviews:

Related manuals for Makito

Brands by name

Popular brands

Haivision Makito, User Manual

Search results

Summary of Contents for Makito

Reviews:

Related manuals for Makito

Brands by name

Popular brands