Haivision Makito, User Manual

Page: 233 / 294

CLI Command Reference
service
Makito User’s Guide, v2.1.0, Issue 01 233
service
S
YNOPSIS
service name action
where:
name
D
ESCRIPTION
For security purposes, you may need to stop one or more network services from accessing
the Makito. The
service
command is used to enable and disable the following network
services: HTTP, RTSP, SNMP, SSH, Telnet, and VF.
IMPORTANT
If the COM1 serial port is used for metadata capture, and HTTP, Telnet,
SNMP, and SSH services are disabled, the only way to re-enable these services will
be by a Factory Reset. (For details, see “Resetting the Encoder” on page 54.) Once
the serial port is dedicated for metadata capture, it is no longer usable for CLI
management.
A
CTIONS
E
XAMPLES
# service telnet stop
Stops telnet connection to the Makito.
# service all stop
Stops all network connections to the Makito.
S
EE
A
LSO
• Enabling and Disabling Network Services on page 134
can be:
all, http, rtsp, snmp, ssh, telnet, vf
start
Activates the service immediately and configures the unit so that
the service will be started automatically when the unit is rebooted.
stop
De-activates the service immediately and configures the unit so
that the service will be disabled when the unit is rebooted.
status
Displays the current status of the service, i.e., if it has been started
or stopped.