Haivision Makito, User Manual

Page: 158 / 294

Managing Users and Security
Managing Audits
Makito User’s Guide, v2.1.0, Issue 01 158
Managing Audits
NOTE
The
A
UDITS
page is only accessible to administrators.
From the
A
UDITS
page, administrators can set up logging to an Audit server for the Makito.
To configure an Audit server:
1.
Click S
ECURITY
from the main menu, and then click A
UDIT
from the submenu.
The
A
UDIT
page opens as shown in the following example.
2.
Check the Enable Audit checkbox to start logging to the audit server.
3.
Type the audit server address and port in the Audit Server Address field. See “Audit
Settings” on page 159 for more details.
The server address must be the Common Name or one of the Subject Alternative
Names in the server’s certificate for successful authentication if TLS and CA-signed
trusted server is set.
4.
Set the type of transport protocol that will be used to send the logs to the audit server.
See details in
“Audit Settings” on page 159.
5.
If TLS is selected as Transport, choose the type of audit server to be accepted as a
trusted server: either All (no server authentication), CA-signed or Self-signed.