Managing Users and Security
Managing Audits
Makito User’s Guide, v2.1.0, Issue 01
159
If Trusted Servers is set to CA-signed, the root-CA certificate of the audit server cer-
tificate chain must be imported in the encoder (see
150) for the TLS connection to succeed.
6.
If Trusted Servers is set to Self-signed, fill in the Fingerprint field to identify the
certificate trusted for this TLS connection.
The fingerprint should be that of the certificate that belongs to the audit server which
was set in “Audit Server Address”.
7.
To apply your changes, click
.
Audit Settings
The following table lists the Audit controls and settings:
Audit Setting
Default
Description/Values
Enable Audit
disabled
Check or clear this checkbox to enable or
disable audits for the system.
Audit Server
Address
n/a
Type in the address and port of the remote
server, in one of the following formats:
• fqdn[:port]
• ipaddr[:port]
• hostname[:port]
If the port is not provided, the default port
for the chosen transport will be used:
Transport
UDP
Select the Transport Type from the drop-
down list:
• UDP (default port: 514)
• TLS (Transport Layer Security, default
port: 6514)
