Haivision Makito User Manual Download Page 100

Page: 100 / 294

Managing the Encoder

Configuring Media Effects

Makito User’s Guide, v2.1.0, Issue 01

100

To upload a new image file in either BMP, JPEG, PNG, or GIF format, click

next to the Logo Filename field.

In the Logo file dialog, click

Browse

to select the image file and then click Upload.

By default, the encoder will be temporarily stopped; however, you may uncheck this
box to allow the encoder to continue streaming.

The image file will be converted to Haivision’s image overlay (.oly) format and will
be included on the Logo Filename drop-down list.

To configure a logo overlay, select or enter value(s) in the appropriate field(s). See

“Logo Settings”

on page

101.

To delete an image file from the list of available Logo Filenames, click

next to the Logo Filename field.

To apply your changes, click

NOTE

Logos are stored on the Makito file system in the folder

/usr/share/haivision/logos

Summary of Contents for Makito







































































































































































































































































































Search results

Summary of Contents for Makito

Reviews:

Brands by name

Popular brands

Haivision Makito, User Manual

Search results

Summary of Contents for Makito

Reviews:

Brands by name

Popular brands