Haivision Makito User Manual Download Page 51

Page: 51 / 294

Installing the Encoder

Powering Up the Unit

Makito User’s Guide, v2.1.0, Issue 01

MB6 (6-Slot) Chassis

The MB6 is available in three power supply types:

•

MB6-AC: Redundant AC Power supply (Dual-Input, Dual-Power supply)

•

MB6-MED: Medical Grade AC power supply, Non-Redundant (Single-Input, Single
power supply)

•

MB6-DC: DC Power supply, Non-Redundant (Single-Input, Dual-Power supply)

WARNING

To prevent electric shock, do not remove the cover of the MB6 chassis.

There are no user-serviceable parts inside. The MB6 chassis is to be installed and

serviced by qualified personnel only.

Figure 2-15

MB6-AC Chassis showing Power Connectors

Figure 2-16

MB6-MED Chassis showing Power Connector

CAUTION

The power supply cords are used as the main disconnect devices on the

MB6-AC and MB6-MED chassis. Therefore, ensure that the socket-outlet is

located/installed near the equipment and is easily accessible.
The MB6-AC chassis has more than one power supply cord. Be sure to disconnect both

(2) power supply cords before servicing to avoid electric shock.

PSU Power On/Off Switches

AC Power Receptacles

PSU Status LEDs (green)

PSU Fault LEDs (red)

PSU Power On/Off Switch

AC Power Receptacle

Summary of Contents for Makito







































































































































































































































































































Search results

Summary of Contents for Makito

Reviews:

Related manuals for Makito

Brands by name

Popular brands

Haivision Makito, User Manual

Search results

Summary of Contents for Makito

Reviews:

Related manuals for Makito

Brands by name

Popular brands