manualshive.com logo in svg

Haivision Makito, User Manual, Page: 102 / 294

Share
Download
Haivision Makito User Manual Download Page 102

Managing the Encoder 

Configuring Media Effects

Makito User’s Guide, v2.1.0, Issue 01

102

Still Image Streaming

When creating a stream, you can specify a static image that will be used to replace the 
encoded video stream when the stream is paused. This feature may be used, for example, 
to block out sensitive content or deliver announcements and other messages. (See 

“Selec-

tive Video Mute”

 on page

 

93.)

The supported source formats for the static image are BMP, JPEG, PNG, and GIF. 

The supported output resolutions are 1920x1080, 1280x720, 720x480 (NTSC), and 
720x576 (PAL).

TIP  

For best results, the input file resolution must be the same or greater than the output 

resolution.

To configure a static image:

1.

Click 

S

YSTEM

>E

NCODER

>M

EDIA

 to open the 

M

EDIA 

S

ETTINGS

 page.

2.

To upload a still image file, click 

 next to the Still Images field.

3.

On the Still Image file dialog, select the Output Resolution for the image.

4.

Click 

Browse

 to select the image file and then click 

.

By default, the encoder will be temporarily stopped; however, you may uncheck this 
box to allow the encoder to continue streaming.

The static image is encoded into a single H.264 GOP sequence and will be used to 
replace the “real” video stream when the stream is paused.

Summary of Contents for Makito







































































































































































































































































































Reviews:

No comments