Hagie 204, Operator'S Manual

Page: 58 / 141

x
V. OPERATING INFORMATION
TASSELTROL
®
CONTINUED
When operating the LS system, always select
“MANUAL” when first entering the field. Once you
have maintained your operating speed and the
cutting and/or pulling depth, select “AUTO.” When
you come to an area where the corn is very short,
such as a low spot in the field, you may want to
switch to the “MANUAL” position until you reach
taller corn.
Always switch to the “MANUAL” position be-
fore you reach the end rows (fig. 5.30). This will
allow the cutter or puller heads to maintain their
cutting or pulling height when re-entering the field
(fig. 5.31), then you may switch back to “AUTO.”
FIG 5.32
AUTO MODE
MANUAL MODE
AUTO MODE
SHORT CORN OPERATION
FIG 5.31
FIG 5.30